Authors: Shivani Baban Suryawanshi, Dr. T Y Badgujar
Abstract: Disc brake performance and service life are strongly influenced by the tribological interaction between the brake pad and rotating rotor. Non-uniform contact pressure, frictional traction, material stiffness, and wear resistance can produce localised material removal and alter the contact state during repeated braking. This paper presents a finite-element-based framework for evaluating pad–rotor contact and predicting progressive wear using a generalised Archard wear formulation. The study is based on a three-dimensional modular brake-corner model described in the supplied project report. A 2.5 kN normal actuation load is considered, and tangential friction is represented through Coulomb friction. Three friction-lining candidates—organic composite, semi-metallic lining, and ceramic matrix composite—are compared using the reported elastic properties, friction coefficients, and dimensional wear coefficients. The source-reported numerical results indicate that inclusion of tangential traction changes the pressure field from a near-symmetric distribution to an asymmetric leading-edge concentration. Under the combined sliding-friction case, the organic baseline reaches approximately 15 µm maximum pad wear after about 2900 rotor revolutions (approximately 2.5 km sliding distance). Across the material cases, reported maximum wear depths are 15.0, 6.2, and 2.1 µm for organic, semi-metallic, and ceramic linings, respectively. The results demonstrate a trade-off between compliance, running-in duration, pressure concentration, and wear resistance. Since the numerical values are taken from the supplied report and were not independently rerun for this paper, they should be interpreted as reported simulation outputs requiring reproducibility and experimental validation.