Analysis of Fuzzy Logic Based MPPT Technique for Solar PV System Using MATLAB/SIMULINK

Uncategorized

Authors: Nisha Kumari, Taranjeet Kaur

Abstract: The performance of a solar photovoltaic (PV) system is strongly influenced by changes in solar irradiance, which shift the operating point of the PV array. This study analyzes a fuzzy logic based Maximum Power Point Tracking (MPPT) technique implemented in MATLAB/Simulink. A single approximately 250 W PV module is interfaced with a DC–DC boost converter and a fuzzy logic controller using the error and change in error as control inputs. The controller uses five linguistic variables—Negative Big, Negative Small, Zero, Positive Small and Positive Big—and a 25-rule knowledge base to regulate the converter duty cycle. The system is evaluated at 800, 600, 400 and 200 W/m² while the temperature is maintained at 25°C. The thesis results show that the fuzzy MPPT reaches stable powers of 200, 150, 100 and 50 W respectively, matching the stated target maximum powers. In contrast, the corresponding responses without fuzzy MPPT oscillate over 194–206, 145.5–154.5, 97–103 and 48.5–51.5 W. These results indicate that the fuzzy controller provides stable maximum-power operation across the tested irradiance conditions.

DOI:

× How can I help you?